DRDT-2  (Dash 2) is a welded steel c-frame rivet dimpler.  It replaces the common impact c-frame rivet dimplers of the past. With its sample mechanical advantage, dimpling is fast, easy, noise free, less fatiguing and safe on the skins. With a fully adjustable die holder you can achieve consistent and accurate dimples**.  The DRDT-2 incorporates a new low force spring return system that prevents skin damage from the accidental release of the handle without increasing the force required to dimple.  22" throat depth allows dimpling of up to 44" wide sheets. The relief under the lower frame member provides dimpling access to spars, ribs, leading edge skins. Designed and analyzed using state of the art engineering tools the DRDT-2 can handle all your dimpling needs on your project. 

Now dimpling is consistent, easy, safe, less fatiguing and noise free. Now you can dimple at anytime day or night without disturbing your family or neighbors.  The experimental aircraft builder can now achieve commercial quality results in their own shop.

The DRDT-2 is painted with an industrial powder coat giving one of the toughest finishes available.  The -2 comes ready to dimple (minor assembly required) or can be purchased as a Front End Kit and the builder can construct the frame* to the frame fabrication drawings provided (frame structural steel not provided with Front End Kit).

*Steel sections can be purchased locally either through steel scrap yards or excess material from steel fabricators.  The frame can be fabricated by a local steel fabricator or by the builder themselves.  Basic welding skills and tools required (or at least a friend with them).

**Dimple dies not included

DRDT-2 Setup and Operations Manual

DRDT-2 Frame Fabrication Drawing

Operational note: The DRDT-2 weighs approximately 55 lbs and should be clamped securely to a sturdy work surface.    

Email for availability and shipping cost verification: sales@experimentalaero.com  

FedEx Ground Shipping Time (Business Days)

 ***Shipping costs will be determined based on FedEx Ground fees.  If paying using PayPal, additional PayPal fees will be applied to shipping charges.

You can access the FedEx Ground shipping rates at http://www.fedex.com/ratefinder/home?cc=US&language=en . 

****The Front End kit contains all components to build the DRDT-2 except the structural steel.  Also included in the DRDT-2 Front End kit are assembly and frame fabrication drawings (11"x17"), and a construction/operation manual.  In addition, a platform fabrication drawing is provided to build a movable platform to help stabilize the skin while dimpling. 

Price includes domestic shipping charges. Shipping outside of the US will be priced on an individual order basis.

Email for availability: sales@experimentalaero.com  

Payment methods

PayPal: Additional fee may apply

Personal checks. Please confirm order placement via email sales@experimentalaero.com  

Make payment to:

ExperimentalAero

12351 E. Lou Bock Pl.

Tucson, AZ 85749

Prices subject to change at any time